| |
 |
 |
 |
|
Great Pump! Requires Clearance |
March 26, 2020 |
| Reviewer:
Pasquale Popolizio from New Jersey
|
|
This pump is of amazing quality, and installs easily. You cannot use an oil pump puller, since it lacks an internal oil outlet, and because of that, you cannot place the T-piece into it, so make sure it fits before you put it in! Since it uses bolts instead of studs, you can place the bolts into two of the corners of the housing, put a bar between them, and turn. The pump will then be offset 45 degrees, and you can now safely pry it out from the corners with plastic pry bars without damaging it! I expected this to be bolt on, since my cam is also from CB performance, and they have already done some custom work to this pump. However, the press fitted oil pump shaft still hits the bolts on my eagle cam gear, so you still need to wear that down a millimeter or two. I used a belt sander with an 80 grit belt, and now it fits fine! I'm using this pump in combination with a turbo and, external oil filter, and an aux oil cooler. Would recommend, and would buy again!
Was this review helpful to you? 
|
|
 |
|
 |
|