2" Narrowed Puma™ Adjustable Beam - Type 2

CB has done it again! New for 2006! The Type 2 PUMA™ Adjustable Beam After two years of design and testing, they are here and ready for shipment!

1. Designed and engineered by CB Performance!
2. Narrowed a full 2 Inches
3. Fully Adjustable! Go from stock height to slammed.
4. Includes PUMA™ adjusters with extra deep, wide teeth designed just for Type 2's
5. Exclusively Produced by an OE Manufacturer for CB Performance
6. Fits Type 2 to 1963 1/2 and late 1963 1/2 to '67 with slight modification to upper and lower Torsion Arms.

Fits Type 2's, 1955 to '63 1/2. 1963 1/2 through '67 requires removing the trailing arm sleeves. (pretty basic).

- New 3/8 Sideplates.
- New ALL METAL large tooth/long slot adjusters. (Puma™ style)
- New center keepers.
- New center pin and bushing.
- New tubing.
- New bushings.

These beams can be made into 4" beams with about 20 minutes of work.

Exclusively Produced by an OE Manufacturer for CB Performance.

Also available from CB Performance:
6301 - 2" Narrowed Torsion Leaves - Type 2
6302 - Narrowed Tie Rod Set - Type 2
6313 - Puma Style Adjusters - Type 2
211-405-129 - Bus Torsion Arm Seals - to '67