There are those that say
'We can't make it
here anymore'...

Well, we've got a list
of products that
proves them wrong!



You are here: Home > New Products
Here's a run down of the latest products that have been recently added to our product line.
Sort By:
Page of 2
040-115-431 Oil Pressure Relief Bypass Plug - OEM - NOW BACK IN STOCK!
Your Price: $9.95

These are the latest OEM VW Oil Pressure Relief Plugs and use a 10mm Allen Wrench to tighten.  Much easier to install and tighten than the old slotted type.

1279 Oil Pressure Relief Bypass Plug
Your Price: $5.95

These are the latest style Oil Pressure Relief Plugs and use a 8mm Allen Wrench to tighten.  Much easier to install and tighten than the old slotted type.

Center Console Basket (specify color)
Your Price: $29.95

Store your goodies in this handy center console basket. It fits snuggly over a Sedan's interior center tunnel, in front of the shifter. Holds two beverages (one small, one large) with room for a few other items (such as a sunglasses case, hand sanitizer, or winter driving gloves.)

Available in three colors; Black, Chrome and Cream. Please specify your desired color in the drop-down menu above.

PLEASE NOTE: Black and Chrome are currently available in the newer more-compact version, with flip-out cup holders, and wallet/phone gripper. Cream is currently only available in the larger old style, without the flip-out cup holders and wallet/phone gripper.

1409 044™ CNC Ultra Wedge Ports - VW650 Valve Springs & Titanium Retainers (46 x 37.5) 94 Bore
Your Price: $1,184.95

With 46 x 37.5mm Stainless Steel valves, CNC Porting, VW650 Valve Springs, Titanium Retainers, and SUPERGRIP™ Valve Locks. 94 Bore.

The 044™ Ultra Wedge Port Head is the ultimate in flow and velocity. The intake valve has been increased to 46mm, resulting in 10% more flow than the standard Wedge Port. The Ultra Wedge Port uses the exclusive CB VW650 Valve Spring along with SuperGrip Single Groove Valve combination, which allows lift of up to .630" with .050 left before coil bind! The combustion chamber has also been redesigned for better quench. Chamber volume is now 69cc, perfect for turbo use, if desired.

Sold in Pairs - Specify Camshaft & Rockers when ordering!

1423 044™ CNC Super Pro (45 x 37.5) 94 bore
Your Price: $1,044.95

With 45 x 37.5mm Stainless Steel valves, CNC Porting, Dual Hi-Rev Springs, Chromoly Retainers, and SUPERGRIP™ Valve Locks. 94mm Bore.

We pulled out all the stops on this one! This all-new port design focuses around high port velocity and smaller size.

This is the perfect head for street cars, bracket race cars or turbo cars. Available in 94mm bore with 45mm intake and 37.5 exhaust valves.

Sold in Pairs - Specify Camshaft & Rockers when ordering!

044™ CNC Super Mag Round Ports (specify size)
Your Price: $894.95

With Stainless Steel valves, CNC Porting, Dual Hi-Rev Springs, Chromoly Retainers, and SUPERGRIP™ Valve Locks.

The Super Mag CNC Round Ports are made for small to medium size engines, and are based on the same "All New for 2017" 044™ Castings as the rest of the 044™ line up.

Option: All heads are available w/Titanium Retainers, VW650 Springs, or SUPERGRIP Snakeskin Valves at added cost.

We can match- port a pair of Big Beef Intake Manifolds to fit your new Super Mag CNC Round Port Cylinder Heads!

The #1396 Standard Bore Head has 55cc as-cast chambers.

Sold in Pairs - Specify Camshaft & Rockers when ordering!

044™ CNC Mini Wedge Ports (specify size)
Your Price: $1,044.95

With Stainless Steel valves, CNC Porting, Dual Hi-Rev Springs, Chromoly Retainers, and SUPERGRIP™ Valve Locks.

The Mini Wedge Port was designed for engines needing a smaller port than the regular Wedge Port and Ultra Wedge Port 044™ heads.

This head is ideal for street and race applications on engines as small as 1776cc's and as big as 2400cc's. Capable of producing over 200 horsepower with a 43mm intake valve. The Mini Wedge Port may be the little brother to the regular and ultra Wedge Port 044™ but it doesn't run like it!

The Mini Wedge Port 044™ is available with a 43x37.5 valve combination in 90.5/92mm bore and 94mm bore. Chamber volume is 65cc.

Sold in Pairs - Specify Camshaft & Rockers when ordering!

044™ CNC Wedge Ports (specify size)
Your Price: $1,014.95

With Stainless Steel valves, CNC Porting, Dual Hi-Rev Springs, Chromoly Retainers, and SUPERGRIP™ Valve Locks.

The latest in the CNC Port line-up. If you want the edge on the competition, these heads are just what you need! Maximum flow equals maximum horsepower! We have several engines running these heads, that are making over 200 hp on the street! 044™ Wedge Ports are available in 90.5/92mm and 94mm Bore.

Sold in Pairs - Specify Camshaft & Rockers when ordering!



90.5/92mm Wedge Ports - Same head as the award-winning 94mm Bore Wedge Port, but with a 66cc Chamber Volume. Valve sizes of 42x37.5 and 44x37.5 available. For High lift applications, the 650 Valve Spring option is available allowing Valve lifts up to .630" lift.

044™ CNC Ultra Mag Plus (specify size)
Your Price: $1,014.95

With Stainless Steel Valves, CNC Porting, Dual Hi-Rev Springs, Chromoly Retainers, & SUPERGRIP™ Valve Locks.

All ULTRA MAG Plus Cylinder Heads feature full CNC Porting. The intake ports flow 120% more than stock VW cylinder heads. To handle the extra flow capabilities of the intake ports, the combustion chambers are also CNC machined for maximum power and flame travel. Spark plugs are secured in re-located 12mm spark plug bosses for increased strength and durability. The exhaust charge is accelerated through the CNC Machined exhaust ports.

Based on the same "ALL NEW FOR 2017" 044™ Castings as the rest of the 044™ line up, ULTRA MAGS have been taken to the highest level of performance with CNC porting.

ULTRA MAG Plus Cylinder Heads (sometimes referred to as Oval Ports) are race ready and offer maximum HP potential for ultra high performance engines right out of the box! We do it all, just bolt 'em on!

Option: All heads are available w/Titanium Retainers at added cost

Sold in Pairs - Specify Camshaft & Rockers when ordering!

1718 Remote Oil Filter Adpater Mount - Under Fender
Your Price: $19.95

Remote Oil Filter Adapter Mount allows you to mount a Full Flow Oil Adapter under the fender! Black Powder Coated steel that attaches with the bumper bracket bolts. Hardware included.

Fits Type-1 Sedans '56-73

044â„¢ Special Cylinder Head - BARE
1435 044™ Special - BARE with Guides & Seats (40 x 35.5) Standard Bore (each)
Your Price: $261.95

With 40 x 35.5mm Stainless Steel valves, silicon & bronze valve guides (Standard Bore w/seats & guides).

044's™ are more powerful than ever with optional 42 x 37mm Stainless Steel Valves! You've read about 044's and seen 'em run. Now you can have 044's™ with SUPERGRIP S/S Single Groove Valves!. Stronger by design with big flowing ports. Hi-Rev springs, chromoly retainers, bronze silicon racing valve guides, 3/4" long reach spark plug bosses, double thick combustion chamber walls, tapered cooling fins and factory produced by an O.E.M supplier to Volkswagen. The choice is yours, order your 044's™ today with 40 x 35.5mm or 42 x 37mm Stainless Steel valves.

Chamber Volume; Approximately 55 cc's

Sold Individually - Specify Camshaft & Rockers when ordering!

044â„¢ Magnum Cylinder Head
044™ Magnum (specify size)
Your Price: $349.95

With 40 x 35.5mm Stainless Steel Valves, Dual Hi-Rev Springs, Chromoly Retainers, & SUPERGRIP™ Valve Locks.

044's™ are more powerful than ever with optional 42 x 37mm S/S valves! You've read about 044's™ and seen 'em run. Now you can have 044's™ with SUPERGRIP S/S Single Groove Valves!. Stronger by design with big flowing ports. Dual Hi-Rev springs, chromoly retainers, bronze silicon racing valve guides, 3/4" long reach spark plug bosses, double thick combustion chamber walls, tapered cooling fins and factory produced by an O.E.M supplier to Volkswagen. The choice is yours, order your 044's™ today with 40 x 35.5mm or 42 x 37mm S/S valves.

Chamber Volume; Approximately 55 cc's

Sold Individually - Specify Camshaft & Rockers when ordering!

044â„¢ Special Cylinder Head
044™ Special (specify size)
Your Price: $329.95

With 40 x 35.5mm Stainless Steel Valves, Single Hi-Rev Springs, Chromoly Retainers, & SUPERGRIP™ Valve Locks.

044's™ are more powerful than ever with optional 42 x 37mm S/S valves! You've read about 044's and seen'em run. Now you can have 044's™ with SUPERGRIP S/S Single Groove Valves!. Stronger by design with big flowing ports. Single Hi-Rev springs, chromoly retainers, bronze silicon racing valve guides, 3/4" long reach spark plug bosses, double thick combustion chamber walls, tapered cooling fins and factory produced by an O.E.M supplier to Volkswagen. The choice is yours, order your 044's™ today with 40 x 35.5mm or 42 x 37mm S/S valves.

Chamber Volume; Approximately 55 cc's

Sold Individually - Specify Camshaft & Rockers when ordering!

044â„¢ Magnum Plus Cylinder Head
044™ Magnum Plus (specify size)
Your Price: $392.95

With 42 x 37.5mm Stainless Steel Valves, Dual Hi-Rev Springs, Chromoly Retainers, & SUPERGRIP™ Valve Locks.

044's™ are more powerful than ever with optional 42 x 37mm S/S valves! You've read about 044's™ and seen'em run. Now you can have 044's™ with SUPERGRIP S/S Single Groove Valves!. Stronger by design with big flowing ports. Dual Hi-Rev springs, chromoly retainers, bronze silicon racing valve guides, 3/4" long reach spark plug bosses, double thick combustion chamber walls, tapered cooling fins and factory produced by an O.E.M supplier to Volkswagen. The choice is yours, order your 044's™ today with 40 x 35.5mm or 42 x 37mm S/S valves.

Chamber Volume; Approximately 55 cc's

Sold Individually - Specify Camshaft & Rockers when ordering!

1507 Push Rod Tubes - Original JayCee - Panzerwagen - Hard Anodized (set of 8)
Your Price: $89.95

**LIMITED EDITION**
These Panzerwagen Original JayCee Push Rod Tubes are Hard Anodized for a protective coating that is as tough as hardened steel! Available in limited supply.

The original and the best, made in the USA!
The hot set-up with extra clearance for engines with high lift rockers and big cams. These are the push rod tubes you can install or remove without pulling the heads. Made from 6061 extruded aluminum and CNC machined by JayCee, these tubes are the finest made!

One size fits all 1600cc based engines. Shipped in with 8 complete two-piece tubes, 8 double ground springs, and internal buma o-ring kit and 8 retainer washers. Each set of JayCee Push Rod Tubes purchased comes with a free set of Push Rod Tube Seals (#1945). Spring End installed on Case Side.

Push Rod Tube Assembly Installation Instructions

   
 
If you need some help finding what you are looking for,
please call us Toll Free at 1-800-274-8337.