CBP's WIDE 5 Bolt-On Front Disc Brake Kit for Type-1 Sedans feature the Early VW 5 Lug Pattern (5 x 205mm)... Our unique two-piece Rotor / Hub design is what makes this kit possible.

The lug pattern is so large that a Custom Rotor / Hub Assembly had to be designed and engineered. The Hub itself is machined from billet 356 T6 Aluminum, then secured to a machined SAE Certified Grey Iron Rotor.

Kits include Rotors, Calipers / Brackets, S/S Braided Brake Lines, Bearings, Seals, and Mounting Hardware. Optional Billet Bearing Grease Caps (#4344) available separately.



Combine with one of our Early VW 5 Lug Rear Disc Brake Kit and you'll have one Unstoppable Performance Braking Package. Enjoy the ride!

Installation Notes

1. Wide 5 Hubs use 12mm threads, AND increases tire offset by 7/8" on either side - If needed, CB recommends the use of a Narrowed Front Beam to reduce tire offset.
2. This kit will NOT work with Lowered Spindles.
   
3. Vehicles with four-wheel disc brakes using a 67-later master cylinder are recommended to install a 4 lb. Residual Pressure Valve.
4. Longer Studs required for BRM Wheels (1/2" OD).