Home > Clutches & Transmission Parts >

6212 RHINO Transmission Mount Kit - Front & Rear, Fits Swing Axle & IRS (3 pieces)
6212 RHINO Transmission Mount Kit - Front & Rear, Fits Swing Axle & IRS (3 pieces)


 
Alternative Views:


List Price: $75.95
Your Price: $65.95
You save $10.00!

Price with Selected Options: $65.95

Product Code: 6212

Click to view another Hardware Kit

Hardware Kit:


Qty:  
Description
 
CB Performance RHINO Transmission Mounts provide the very best performance and durability available. They were developed to address common shortcomings of most other VW tranny mounts on the market.

What are your options? While OE mounts perform their basic function, they will eventually separate and fail causing engine / tranny flex and vibration. Urethane molded mounts are available as an aftermarket upgrade, but without steel reinforcement, they don't provide the performance and durability of our RHINO mounts. In the most extreme cases, Transaxle Straps are used, but this is typically reserved for racing and off-road applications, due to increased levels of noise and vibration that get transferred to the frame.

With RHINO mounts, Grade 5 bolts (10mm) are welded to an internal steel support, then injection-molded with a unique Polyvinyl Formal (PFV) material providing superior strength and durability. The outer shell of the front nose mount is manufactured from cast ZA-1 Alloy.

You'll get less engine and tranny movement and more stability than ever before. You can run RHINO Transmission Mounts as a complete kit, or replacements for Front or Rear. Front mount fits VW Type-1 '52 to '62, Type-2 '63-'67. Rear mounts fit VW Type-1 to '72, Type-2 '50-'67, Type-3 '64-'73 Swing Axle & IRS. No hardware included.

Installation Notes:
- Requires longer 8 x 25mm bolts, sold separately (see drop-down menu above).



Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 4 Write a review.

  2 of 2 people found the following review helpful:
 
5 of 5 Transform your Transmission August 9, 2020
Reviewer: Noah Stanton from Manchester  
Another awesome product from CB. You will need some longer M8 bolts for the rear mounts to the rear cradle as these are thicker due to being heavy duty. They make your bug feel more rooted and far better to drive

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
5 of 5 Awesome! December 5, 2018
Reviewer: Andy Fabbro from CALIFORNIA  
These mounts are awesome! Have installed them on many customer cars. Best on the market!

Was this review helpful to you?

  3 of 3 people found the following review helpful:
 
5 of 5 Fixed the clang October 31, 2018
Reviewer: Derrick from Mobile, AL  
Old mounts were so shot that the intake manifolds were clanging into the bodywork. These new mounts are super tough, but don't transmit too much vibration. The mount points to the crossmember are quite a lot thicker than my 1972 factory mounts, so I had to source some slightly longer bolts.

Was this review helpful to you?

  3 of 3 people found the following review helpful:
 
5 of 5 These are awesome... January 21, 2015
Reviewer: Darrelk from New Albany, OH United States  
I've been through the heaviest duty of the VW mounts, urethane, etc., and these are by far the best for high h.p./torque applications.  I combined them with Mohr front bar, h.d. rear trans strap, and Kafer style truss.  I'm running a 325 h.p. Camden supercharged/ Holley 670 cfrm carbed street ported 13b rotary which makes plenty of torque from 1500 rpm and up.  They almost "feel" solid mounted but little noise or vibration.  Great product.

Was this review helpful to you?


Browse for more products in the same category as this item:

Clutches & Transmission Parts
Clutches & Transmission Parts > Transmission Parts, Mounts & Accessories
CB Performance Products