Home > Exterior Accessories >

BlazeCut Automatic Fire Suppression System (specify length)
BlazeCut Fire Suppression System
 
Alternative Views:


List Price: $307.95
Your Price: $267.95
You save $40.00!

Price with Selected Options: $267.95


Product Code: BLAZECUT


Specify Length*:


Qty:  
Description
 

PEACE OF MIND on EVERY DRIVE!


Protect yourself and your cherished ride from potentially going up in flames with the BlazeCut Automatic Fire Suppression System. While fire extinguishers are affordable and easy to install (and we recommend having at least one installed in every vehicle), there is always a risk of getting burnt if opening the engine hood to extinguish the fire. And who will put out the fire if the vehicle is in an accident and the people inside are trapped?

BlazeCut Fire systems automatically actuates in the engine compartment when a fire occurs, extinguishing the fire in seconds leaving very minimal damage to your vehicle and keeping you safe. It uses an extremely effective, clean and people-safe extinguishing agent (HFC-236fa) that provides a simple, reliable, and self-contained safeguard for your air-cooled VW (details). Also available with Pressure Switch.

How It Works:
If ever the temperature in your engine compartment rises to a critical threshold of 248Β°F, the detection tube ruptures at the hottest point, releasing the entire extinguishing agent onto the source of the fire. Pressure Switch Models include an optional mechanical switch with one pre-set pressure value "switch point" (details). When the pressure in the system drops below the switch point, power can be cut to the ignition coil, adding an extra layer of protection against engine damage. Note: CBP recommends the use of a 12V relay (sold separately) between the pressure switch and ignition coil (diagram).

Features & Benefits:
  • Simple / Efficient – The heat-sensitive polymer tube has both storage and detection function which means that the extinguishing agent is stored directly in the tube and no additional storage device like a cylinder is required.
  • Easy Installation – Using the included zip ties, just mount it to the underside of your deck lid for Type-1 Sedans, or directly above your engine in the engine compartment on Type-2's, and you're good to go!
  • Automatic Activation – No driver input required – just automatic protection when you need it most.
  • Maintenance Free – The system requires no maintenance during its entire working life; the self-contained system is ready to activate at all times.
  • Safe & Harmless – The non-corrosive extinguishing agent does not conduct electricity, corrode, or cause thermal shock damage – safe for fuel, electrical, and engine components.
  • Long Durability – The fully sealed system has a life expectancy of up to 10 years depending on the type of application and system environment.
  • Pressure Gauge – End of line pressure gauge to visually monitor the system at any time, the gauge shows the current pressure inside the tube and indicates when the system is ready for use.

Available in 6 foot (recommended for Type-1) or 9 foot lengths (recommended for Type-2) – Specify desired length in the drop-down menu above.

TESTIMONIALS


Shipping Restrictions: Available to customers in the Continental United States (lower 48 states) via UPS GROUND ONLY.

BLAZECUT Automatic Fire Supression System

Accessory Parts
6697 Power Relay - 20/30 AMP
Your Price: $5.95

Add
6697 Power Relay - 20/30 AMP

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Exterior Accessories
Exterior Accessories > Exterior Seals, Trim & Accessories
Exterior Accessories > Hood & Trunk Parts
Carburetors, Fuel Pumps/ Tanks & Accessories
Carburetors, Fuel Pumps/ Tanks & Accessories > Gas Tanks & Accessories