Home > Oil Pumps & Cooling Systems >

Maxi 30 Full Flow Oil Pump (with 3/8'' outlet) up to '70 (specify color)

Maxi 30 Full Flow Oil Pump (with 3/8'' outlet) up to '70 (specify color)

Alternative Views:

List Price: $81.95
Your Price: $70.95
You save $11.00!

Product Code: MAXI30FFEARLY

Click to view another Color


The Maxi 30 is the newest addition to the CB Performance oil pump series. This pump is engineered like our other Maxi series pumps with a die cast blue printed housing and pressure chamber. The Maxi 30 housing is designed to be used as a full flow pump so no need to install a plug. The 30mm drive gear is keyed to the shaft so you never have to worry about slipping a gear. The anti-cavatational design ensures 100% of the oil will make it out of the T-6 billet, large 3/8" outlet cover, to what ever you have between the pump and engine block. With features like 30mm 9 tooth gears and a 3/8" outlet this is the highest volume pump in the line-up, and it looks good too!

1859, 1860, and 1861 work with 3 Bolt Flat Cams.

1862, 1863, and 1864 work with 4 rivet Dished Cams.

Face Plate Gaskets are also available. Works with these fittings: #3977 Brass Fitting - 1/2'' Hose x 3/8'' - 18 NPT, and #3835 #8 Male Flare to 3/8 Pipe Adapter.

Full Flow Oiling Schematic

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
5 of 5 Great Pump! Requires Clearance March 26, 2020
Reviewer: Pasquale Popolizio from New Jersey  
This pump is of amazing quality, and installs easily.  You cannot use an oil pump puller, since it lacks an internal oil outlet, and because of that, you cannot place the T-piece into it, so make sure it fits before you put it in!  Since it uses bolts instead of studs, you can place the bolts into two of the corners of the housing, put a bar between them, and turn.  The pump will then be offset 45 degrees, and you can now safely pry it out from the corners with plastic pry bars without damaging it!  I expected this to be bolt on, since my cam is also from CB performance, and they have already done some custom work to this pump.  However, the press fitted oil pump shaft still hits the bolts on my eagle cam gear, so you still need to wear that down a millimeter or two.  I used a belt sander with an 80 grit belt, and now it fits fine!  I'm using this pump in combination with a turbo and, external oil filter, and an aux oil cooler.  Would recommend, and would buy again!

Was this review helpful to you?

Browse for more products in the same category as this item:

Oil Pumps & Cooling Systems
CB Performance Products
Oil Pumps & Cooling Systems > Oil Pumps & Accessories