Genuine VW Parts Fit Best!

• Disc brake calipers, mounting hardware (10x25-1.50 bolts / washers)
• Brake hoses
• Steering damper
  See Accessory Parts at bottom of this page

• VW Type 1 (Beetle) 1966–1977, Karmann Ghia 1966–1974
• Ball-joint front suspension only (not for Super Beetle / MacPherson strut)
• Suitable for disc-brake conversions on compatible ball-joint Type 1 chassis using 4x130 wheel pattern and appropriate calipers
• Beam width and geometry are stock — no narrowing or drop/raise built in

• *Complete spindle-to-spindle front end: beam, torsion leaves, trailing (control) arms, spindles, backing plates, rotors, steering box, tie-rods, sway bar, and shocks
• Configured for front disc brakes — rotors and backing plates installed; calipers and hoses sold separately
• Stock ride height geometry for predictable steering and alignment
• Ideal for restoration or as a ready-to-run front end with minimal assembly work

• VW did not assign a single OE number for a fully assembled spindle-to-spindle unit
• NOS Condition: Components may show minor storage marks / surface rust consistent with NOS crate-packed assemblies
• Verify steering box input orientation (left-hand drive), brake configuration and wheel bolt pattern to match your chassis before ordering
• Ships in a large wooden crate; in-store pickup or freight/truck shipment is required due to size and weight (~181 lbs). Standard parcel service is not available.