Designed for performance and off-road VW King/Link Pin front suspension applications including:

• Baja Bugs
• Sand rails
• Dune buggies
• Manx-style buggies
• Custom long travel VW front suspension builds
• Warrior-style and other compatible King/Link Pin front axle beam applications

These trailing arms are approximately 1-1/2" longer than stock, moving the spindle and front wheel centerline rearward approximately 1-1/2" relative to the beam pivot points. The increased arm length provides additional suspension travel potential for off-road applications.

The arms are also 3/4" wider per side, increasing total front track width by approximately 1-1/2".

Actual wheel travel will depend on the complete suspension combination, including axle beam, shock length and mounting location, spindles, link pins, steering components and suspension stops.

• These are long travel/off-road suspension components and are not intended as direct stock replacement trailing arms.
• Uses 5/8" link pins rather than standard stock VW link pins.
• Verify compatibility of your axle beam, spindles, link pins, torsion leaves or thru-rods, shocks and steering components before installation.
• Extended front suspension geometry may require changes to steering linkage, shock setup and body or tire clearance depending on the vehicle.
• Professional installation and suspension setup is recommended for off-road and custom applications.