JAMAR JCB5 Single Upright Handle Turning Brake

Home > The Sand Center - Off Road Parts >

6338 JAMAR JCB5 Single Upright Handle Turning Brake - 3/4" Bore

Alternative Views:

List Price: $324.95

Your Price: $279.95

You save $45.00!

Stock Status:In Stock

Product Code: 6338

Qty:

Description

JAMAR JCB5 Single Upright Handle Turning Brake - 3/4" Bore

The JAMAR JCB5 is a single-handle hydraulic turning brake designed for sand rails, dune buggies, off-road vehicles and other custom applications where independent control of the rear brakes can help tighten turns and improve maneuverability.

The upright push / pull handle allows either rear brake circuit to be applied independently through a single control. The JCB5 features billet aluminum construction with hardened 3/4" bores and three 1/8" NPT hydraulic ports. The center port serves as the inlet from the brake master cylinder, while the upper and lower ports connect to the individual rear brake circuits.

Features:

Single upright push / pull handle design
Independent control of left and right rear brake circuits
Billet aluminum construction
Hardened 3/4" hydraulic bores
Three 1/8" NPT hydraulic ports
Center inlet with separate upper and lower brake outputs
Suitable for properly configured disc or drum brake systems
Intended for sand rails, dune buggies and off-road applications
Made in USA
JAMAR Part # JCB5

CB# 6339 - JAMAR JUS2002X Dual Handle Turning Brake - 3/4" Bore.
CB# 6118 - JAMAR JUS20R 3/4" Turning Brake Rebuild Kit.

This turning brake must be properly plumbed into separate left and right rear brake circuits. Hydraulic routing and brake-system configuration will vary by vehicle.
The center 1/8" NPT port is the master-cylinder inlet; the upper and lower ports provide the separate brake outputs.
Verify brake-system compatibility, fitting requirements and hydraulic configuration before installation.
A turning brake is intended as an auxiliary steering / maneuvering control and is not a substitute for a properly functioning service brake or mechanical parking brake system.
This is a universal/ custom hydraulic brake component. Verify bore size, mounting configuration, available clearance and hydraulic system requirements before ordering.
For detailed installation, hydraulic setup and service information, refer to JAMAR technical documentation or contact JAMAR Performance directly.

JAMAR Instructions & Technical Information
JAMAR Brake Bleeding Instructions
JAMAR Brake Check List

Browse all Brass Pipe Fittings

Accessory Parts

6118 JAMAR JUS20R Billet Turning Brake Rebuild Kit - 3/4" Bore

6339 JAMAR JUS2002X Dual Upright Handle Turning Brake - 3/4" Bore

Sale Price: $28.50

Add

Your Price: $294.95

Add

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

The Sand Center - Off Road Parts
The Sand Center - Off Road Parts > JAMAR Products
Rear Brakes & Suspension
Jamar
Made in the USA!


2190 Standard Length Dip Stick (Black Anodized)	Multi-Function Center Console "Hump" Basket \| Made in USA (specify color)	2240 Eagle Racing Camshafts	7181 Fast Fab Billet Fuel Tank Clamp Kit (Clear Anodized)
$4.95	$44.50	$149.95	$70.95