 |
 |
 |
|
Builder's Choice Engine Kits – The Ultimate Long Block Solution!
Take the guesswork out of your next engine build with CB Performance's Builder's Choice Engine Kits – carefully curated Long Block kits designed for maximum reliability and performance. Whether you're restoring a classic or pushing the limits of air-cooled horsepower, these kits combine decades of engine-building expertise with top-tier components, giving you a rock-solid foundation for street, strip, or off-road performance.
CBP offers nine different kits, available in popular displacements from 1776cc to 2387cc, delivering reliable power output from 90hp to 220hp. Each kit includes precision-matched and balanced internal components – forged
crankshaft, rods, pistons & cylinders, flywheel, clutch, camshaft, lifters,
cylinder heads, rocker assembly, bearings, gaskets,
and more – See complete list below!
Key Features:
- Complete
Long Block kits with top-tier, race-proven components
- Engineered
for compatibility, ease of assembly, and long-term reliability
- Built
with precision clearances and balanced combinations
- Backed
by CBP's unmatched customer support
To complete your custom engine setup, CBP offers a full range of complementary products, including Intake Kits, Ignition Systems, Cooling Tin, Alternator Kits, Pulley Kits, and Exhaust
Systems
. Each component is crafted to work flawlessly with your Builder's Choice Engine Kit, providing the flexibility to create a high-performance engine tailored to your needs.
Note: These kits contain a wide variety of components. As a result, you may see an “Out of Stock” message when adding them to your cart. If this occurs, please contact your salesperson directly or email us at [email protected] to check availability. Prices are subject to change when items are restocked.
Build it your way. Build it with confidence.
Build it with CB Performance!
Builder's Choice Engine Kits
NOTES:
- OEM Quality Brass Distributor Drive Gears are NO LONGER AVAILABLE. Due to this, CBP no longer supplies them in the Builders Choice Engine Kits and recommends engine builders source a quality used OEM gear instead of inferior reproductions currently being offered.
- CBP only offers Completely Balanced Engine Kits to ensure your new engine build is if off to a great start! Proper balancing helps reduce vibrations, minimizes wear on bearings and other moving parts, and can even improve efficiency and power delivery.
- For those with minimal or no engine building experience / knowledge, CBP recommends you always consult a qualified engine builder for assembly instructions, tuning, and proper break-in procedures.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 1182 - 140 HP 2017cc (78.4 x 90.5) Builders Choice Engine Kit includes:
2242 - Eagle Racing Camshafts
1274 - CB Super Case - AS41 Dual Relief Magnesium Engine Case (fits Type-1 & 2)
1289 - Super Race Rods (VW Rod Journal) 5.4" length (set of 4)
Maxi30 - Maxi 30 Full Flow Oil Pump (your choice of cover color: Black, Blue or Red)
1278 - CB High Performance Case Kit
1537 - 28mm Ultralight Lifters (set of 8)
1941 - Rear Main Seal - 13, 15, & 1600cc
1825-STD - CLEVITE Main Bearings - Type-1 (STD/STD/STD)
1865 - Rod Bearings Type-1 STD
1399 - CB Performance Straight Cut Adjustable Cam Gears
1565 - Racing Push Rod Tubes (set of 8)
1672 - Panchito 044 (40 x 35.5) 90.5/92 Bore w/ Dual Hi-Rev Valve Springs (2 qty.)
1770 - Thin Line Oil Sump (1 1/2 qt.)
1628 - Chromoly Push Rods - Blank End (.035")
1053 - MAHLE Forged Super Big Bore Kit (90.5 x 82mm)
1030 - True-Arc Wrist Pin Locks (set of 8)
040-105-231.1 - Distributor Drive Pinion - Genuine VW
1999 - 8mm Deflector Plates - fits 13, 15, & 1600cc (set of 2)
1946 - Posi-Seal Cam Plug
1153 - Super Race Crank (78.4mm)- VW Rod Journal
1303 - Forged Chromoly Lightweight Flywheel - 200mm (o-ring seal) or Dual Weight Flywheel (1305)
1311 - Stage 1 - 1700 lb. 200mm Kennedy Clutch
1360 - Racing Gland Nut with Washer
1229 - Cylinder Head Studs - 8mm Chromoly - Dual Port
1849 - Racing Camshaft Bearing Set
1918 - Crankshaft Gear Assembly Kit w/Racer Spacer
1685 - CB Super Stock Rocker Arm Complete Kit 1.25:1 Ratio (includes Swivel Feet)
1362 - End Play Shim Kit
1901 - Engine Hardware Kit (Without Head Nuts)
1369 - Racing Clutch Bolt Kit (6 bolts)
1973 - Gasket Set - 13, 15, & 1600cc Dual & Single Port Engines
LABOR-BCEK - Balance Complete Engine Kit
NOTE: HP is rated using Dual 44mm IDF Carbs with Match-Ported Big Beef Manifolds, 1-5/8" Merged Exhaust. Compression is set at 8.7:1 using listed parts in kit. Premium fuel is required for this kit.
|
|
|
|
|
|
|
Engine kit delivery 
